The Tiger Shark 55 is probably one of the most iconic design from Franco Harrauer. ALALUNGA IX is the second (and only existing) hull of this boat refitted from the current owner she is in his original shape ready for cruising.
FURTHER BROKER’S COMMENTS:
ALALUNGA IX is hull number two of the two “Tiger Shark 55’s” designed by Franco Harrauer and built by Cantieri Società Aeronautica Italiana owned by Ing. Ambrosini. The boat was the result of a design experiment involving the most important naval architects of the era. The concept was born at a symposium at the Salone Nautico di Genova in 1967. With the first boat launched a year later and displayed at the Genoa show.
The Società Aeronautica Italiana (SAI) Ambrosini shipyard was opened in Passignano sul Trasimeno specifically to build the Macchi C200 fighter plane used by the Italian military during World War II. After the war the facility start using its technology and construction skills for civil aviation projects and the two yacht designs from Franco Harrauer: the Tiger Shark 55 and the Blueshark 950.
Today ALALUNGA IX is a great example of classic Franco Harrauer design and the technological experimentation found in post-war Italy. She is not only a piece of important Italian history, but a work of art in her construction and a very capable sea-going motor yacht, ideally suited to offshore sportfishing.
Refitted in 2017 and with the benefit of replacement CAT 425hp engines in 1999 (with only circa 300hrs run), ALALUNGA IX is in great shape and ready for her next owner.
The sea vocation of SAI Ambrosini was born from the seaplanes, from the light alloy processing technologies acquired in decades of aeronautical processing, which led to the construction of avant-garde racers.
Many projects were carried out by the Marine Division of the SAI Ambrosini both for civil and military use; for the private clientele many sailboats and motor boats were built and, among the first, they are unforgettable YENA - at the top of the most important IOR rankings and unharmed by the terrible storm of the 1979 Fastnet, DIDA, CARINA VON FORELE, PACIFIC, DOCTOR FAUST, EMEREAUDE II, IL MORO DI VENEZIA - entirely in light alloy, and LONGOBARDA - first maxi-yacht in carbon fibre..
Not many years have passed since February 1967 when a small group of naval architects gathered at the Genoa International Boat Show to discuss the various and complex problems of the sector in a symposium.
Today, just over three years away, the results confirm the need for the presence of the naval designer in the team of designers. These architects are specialists who know the nautical problems of life on board and navigation: they are professionals who have a particular direct construction experience, combined with a sensitivity on the knowledge of shipbuilding problems.
In fact, it is not possible to design or furnish a cabin without specific experiences, based only on an "earth" design designed for interiors that are fixed and that only an earthquake can move.
The boat is a living construction, always on the move and subject to the most varied internal and external stresses.
The "Tiger Shark" design can be considered a pure "design" experiment, in which no aesthetic concession has been made… The hull, made of Peralurnan 35 aluminium with longitudinal structure, has a very backward CC and the consequent concentration of weights (engine equipment and tanks) in the stern sectors has allowed the use of large volumes for the purpose of habitability, which has an index very high for a boat of only 13 m. of LWL.
The bridge is designed to have a minimum of 2 meters in the habitable zone and a height of aft wall compatible with the fishing needs. Furthermore, this configuration avoids interruption of the beams in the areas of greatest stress. The structure is made up of four side members that act as a base for the engines with a box keel beam.
The distinctive "nose" of the "Tiger Shark" was born as a function of three precise needs:
These three objectives have been achieved with the study of a bow shape that also has a precise hydrodynamic function in sailing conditions with adverse sea. The engine equipment consists of two turbocharged Caterpillar D 336 A-TA diesels delivering a maximum power of 455 HP each. Axles, U-bolts, propellers and rudders are made of stainless steel.
RCD /RINA Status:
· Made of Peraluman 35 with longitudinal structure, a light alloy used for aeronautical constructions. The hulls, like aircraft fuselages, were built upside down on "scali" that used part of the structural elements of the boat.· Hull structure stripped back to raw metal and refinished with transparent coatings – 2017· Hull plate thickness checked prior to 2017 refit
Deck & Superstructure Construction:
Engine & gearbox:
Service & Maintenance:
Propulsion & Steering:
Charging / Inverter:
PLUMBING & GAS SYSTEMS
NAVIGATION & COMMUNICATION EQUIPMENT
Summary of Accommodation:
7 berths in 4 cabins. Double crew cabin forward accessed from deck hatch. Owner’s cabin with twin berths and ensuite heads. Single guest cabin aft to starboard. Guest heads opposite to port. Twin bunk guest cabin aft to starboard. Galley opposite to port. Steps up to main saloon area with settee table, height adjustable table and lower helm position.
Designed for sport fishing on the high seas: the hull is of the deep V type; the external layout has a low cockpit and a tuna-door, tanks for the catch and a compartment for living. In the engine room, 1.90 m high, the generator is also housed.
Anchoring & Mooring:
Covers, Cushions & Canvas:
General note on safety equipment: Any safety equipment such as liferafts, Epirbs, fire extinguishers and flares etc. are usually personal to the current owner(s) and if being left on-board as part of the sale of a used vessel may require routine servicing, replacement, or changing to meet a new owners specific needs.
Lying Marina di Castellabbate, Italy
Available to view strictly by appointment
Office Hours Mon- Fri 0900 – 17.00
Saturday by prior appointment
For more information or to arrange a viewing please contact us.
Please Note: Due to the varying locations of our yachts, your travel time and the distances that may be involved, we recommend that you only make arrangements to view if you are actively considering purchase.
Lead Broker: Michele Antonini – Grabau International (Italia)
Tel: +39 333 74 89 281 Email: firstname.lastname@example.org
Grabau International (Italia) offers the details of all vessels in good faith but cannot guarantee or warrant the accuracy of this information or warranty the condition of any vessel and the details do not constitute a part of any contract. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. All vessels are offered subject to prior sale, price change, or withdrawal without notice. Grabau International (Italia) provides professional yacht conveyancing and legal transfer of title for all yachts as per the ABYA Code of Practice with all deposit payments and final balance payments processed through secure dedicated client accounts solely for that purpose. Dedicated client accounts provided by stakeholder Grabau International Limited are written in trust at Natwest Bank and we are fully insured.
82 Gosport Street , Hampshire
Lymington, Hampshire SO41 9BD