Descripción proporcionada por fabricante
The Cyclades 43.3 is offered with 3 cabins and 3 head compartments. After a gorgeous day in the sun, to be able to retreat to your own cabin and head compartment is part of the pleasure appreciated by everyone. In the "day" version the saloon has enough space for 8 people. In the "night" version the central settee cleverly converts to a full double berth. The good chart table with library and stowage will be the favourite den for the boat's master.
- DECK FITTINGS, RIG AND SAIL OPTIONS -
Ground tackle with 20 Kg + 10m chain + warp + mooring lines + fenders.
Cockpit cushions in Captain Blue.
Teak slatted cockpit benches.
- INTERIOR ACCOMMODATION OPTIONS -
organic waste holding tank to aft starboard and forward heads.
Saloon table convertible to double berth (a set of legs to lower the table).
220 V microwave.
80 L-12 V front-opening refrigerator in bar unit.
8 place settings.
Self-draining cockpit with non-slip GRP floor.
Good sized cockpit benches with non-slip finish.
Cockpit coamings: very comfortable and safe.
Large GRP cockpit table with hinged leaves -quick and easy to put up, giving excellent freedom of movement and welcoming space around the table.
Table fitted with oddments locker, glass holder, bottle rack and handrail, as well as a forward sloping panel for fitting the electronic navigation screen.
For maximum stowage space and comfort when sailing the cockpit is fitted with 2 large lockers to starboard and port.
Cold water cockpit shower to starboard.
Liferaft locker built into deck aft of cockpit with easy access and opening.
Hinged gate over liferaft locker to close off cockpit and for easy access to bathing platform.
One accommodation layout: 3 cabins, 3 heads.
Parquet style laminated soles.
Interior lighting by means of numerous halogen deckhead lights and reading lights.
1 engine battery (12 V, 110 A).
2 service batteries (12 V - 2 x 140 A).
Back-lit electrical panel with 16 x 12 V switches and 3 x 220 V switches.
12 V circuit is protected by fuses (one per switch).
220 V circuit doubly protected: one thermal breaker per switch and a 30mA general differential breaker on the panel.
25 A battery charger.
Battery state alarm on panel.
Electrical shore supply cable (in aft starboard cockpit locker).
220 V cabin electrical socket.
Halogen deckhead lights with built-in switches.
Fittings in place for optional cables.
Radio/CD with 2 interior speakers and 2 watertight speakers in cockpit.
Bi-colour navigation light on pulpit.
Stern light on transom.
Anchor light and steaming light on mast.
Headroom: 2.02 m.
Laminated work surface surrounded by wood handrail.
Plastic wastebin under sink.
Cutlery drawer and stowage under sink.
Shelving for stowage along hull.
Gimballed 2 burner gas hob and oven.
2 T4 opening ports, 171 x 627, in coachroof.
170 L ice box with 12 V refrigeration unit (topopening).
One stowage unit able to take an extra refrigeration unit as an option.
Stainless steel open pulpit.
2 stainless steel pushpits.
Lifebuoy support, ensign staff support and outboard motor bracket.
Two rows of guardrails supported by 2 stainless steel double stanchions and 6 ?vertical? stanchions surround the boat. These are fitted to stainless steel bases.
2 large gates in guardrails.
4 stainless steel handrails to coachroof.
Engine: Yanmar 54 HP with shaft transmission.
Engine mounting built into the inner hull mould.
Soundproofed engine compartment.
Engine control lever and panel with key start built into the steering console.
Three-blade fixed propeller.
Rotomoulded fuel tank (220 litres) under aft starboard berth, with electric gauge connected to electrical panel.
Fuel filter, sediment reservoir and seawater filter.
The hull is single-skinned balsa sandwich construction with reinforcement points.
A built-in structural inner moulding is bonded and laminated to the hull at intervals. Its structural role is important as it takes and absorbs the stresses at pressure points (keel, rudder etc) and spreads any loads guaranteeing reduced strain on the hull.
The inner moulding with its perfect surface gives extra stowage space under the sole and makes cleaning easier.
A skeg is moulded into the hull to protect the propeller shaft.
Osmosis prevention is by the use of a vinylester.
The gelcoat is white.
The deck is sandwich construction (glass fibre and balsa) for an optimal strength/weight ratio as well as excellent sound and thermal insulation.
A ?diamond point? non-slip surface increases safety over all areas of movement on deck.
The deck is reinforced under deck fittings (winches, tracks, U-bolts, cleats).
A built-in inner deck moulding gives the deck a perfect finish.
La Empresa presenta la información de esta embarcación de buena fe