Exquisite, Rare, Fiberglass & Full Keel - s/v "BRUJA" is one of only 8 "Point Hudson" sloops and ONE OF TWO that were professionally completed by World Wind Boat Works of Port Townsend, WA.. Based on the Laurent Giles "25' Vertue".....Exceptionally cared for past and present this big little boat boasts a stunning crafted interior with plenty of headroom and huge V-berth accommodations. Storage abound, newly added head and maintained SABB diesel, this fine example of craftsmanship is not only beautiful dockside but has the seakeeping capabilities for offshore cruising or just taking in the breezes of the Pacific Northwest.
"Bruja" has available hard to find assumable moorage at Ladysmith Maritime Society Marina.
Call our office today!
Great Boats....Great Service!
Call or email firstname.lastname@example.org or 250-755-5887
Please contact Charles Petersen at (250)755-5887
Tilleggsinformasjon, tilbehør og utstyr:
Kjøl: full kjøl
LOA: 27 ft 2 in
Bom: 7 ft 4 in
Maksimum Kjøldybde: 5 ft 0 in
Avvik: 11000 lbs
Ballast: 5000 lbs
Total Power: 8 HP
Motormodell: H8 - 1 Cyl
Propeller: 2-blads propell
Drev type: Direkte drev
Engine Power: 8 HP
THIS HEAD TURNER IS A MUST SEE IN PERSON! s/v Bruja features a beautifully varnished interior that's warm, inviting and spacious for her size. The forward V-berth is HUGE and provides ample sleeping room for two and storage. Starboard quarter berth can be used as a single "pilot berth" or storage. Stainless sink, Optimus ceramic propane 2 burner cooktop, and a "Taylor's" brass kerosene heater are fantastic and add to her classic looking interior. A new head system was installed in 2011.
Hull - Moulded Fibergalss, Foam Core To Bilge, Long Keel, Raked Stern
Transom - Near Plumb "Wine Glass"
Bulkheads - Marine Ply Glassed To Hull, Deck & Cabin
Deck - 1" Tongue & Groove Spruce, Marine Ply Overlay And 8 oz. With WEST SYSTEM Epoxy Overlay.
Deck Beams - 1.5" x 2.25" Laminated Spruce & Iroko
Sheerclamp - Iroko
Cabin - 1.5" x 2" Iroko & 3.5" x 3.4" Iroko Posts
Opening Ports - 6" x 9" Bronze With Safety Glass
Optimus Ceramic 2-Burner Kerosene Stove with 10 gallon S/S Tank
(3x) Bronze ST 2-Speed Winches On Deck And Mast (Self Tailing)
(2x) Bronze Winches (On Mast/ Boom - Main halyard/ Reefing)
25 lb. CQR Anchor
50’ 3/8” Galvanized Chain
150’ 5/8” 3-Strand Nylon Rode
Manual Bronze Drum & Gypsy Windlass Winch
Propellor Is Fully Feathering Variable Pitch - Two Blade
Rule Automatic 750GPH Bilge Pump
Manual 1.5” Diaphragm Portable Bilge Pump
7’ Wood Tender with Fiberglass and Epoxy Bottom w/ Oars
Additional Information For s/v Bruja
Mast, Boom - Removed/ Stripped & Painted (2015)
Lucite Hatches Removed And Rebuilt With Teak & Iroko (2013)
Head System (2012)
Water Tanks (2 x 20 Gallon Vetus Flexible) (2011)
Lead Ingots Cast For Aft Locker To Trim When Water Tanks Were Installed (2012)
Aft Locker Cleaned Out & Repainted (2018)
Anchor Windlass (Added 2012)
Taylor Brass Heater (2012)
Bottom & Hull Painted (2019)
Interior Varnished (2019)
Engine Head & SPARE Head Rebuilt By Thomson Machine (2019)
Delco Starting Generator (2017)
**VESSEL COMES WITH SPARE SABB ENGINE!
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.