STAMPEDE was conceived as a modern performance cruiser that offered a custom, high-quality finish on an easily driven hull form. She was built strong and light to cruise shorthanded or to cross oceans, both of which she has done with great success. She is a powerful offshore yacht with a gorgeous teak joinery raised saloon interior.
Well cared for by her current owner, the boat needs little. Cosmetically she is in great shape, with new paint, teak decks and a clean interior.
STAMPEDE would be an ideal purchase for someone looking for a robust bluewater family cruiser on a budget.
Antall enkeltkøyer: 6
Antall kabiner: 3
Antall toalett: 2
STAMPEDE was conceived as a one-off performance cruiser design and constructed with no expense spared. She was built using the vacuum bag method of a composite laminate structure composed of Kevlar and S-glass, cored with two layers of 5/8" Termanto foam core. Six layers of 9 oz Kevlar and 17 oz biaxial glass are on either side of the foam core. The deck and coach house are constructed out of a 1” Divinycell core, also sandwiched between Kevlar and fiberglass. The interior bulkheads are also cored to save weight, and finished to the highest standards of teak joinery.
Sleeps six owners and guests in three staterooms. Beginning forward is a large sail/storage locker with deck and interior access, containing two fold-down pipe berths and workbench. Continuing aft are two guest staterooms with upper and lower berths, hanging lockers and storage shelves. The galley is next aft on starboard and directly across is a large guest head with shower. Up two steps is the main salon. Excellent panoramic visibility at eye level from all seating arrangements, including the nav station, which is to port, facing forward. Moving aft to port, one enters the walk-thru to the master stateroom, which has engine access, a settee and additional hanging lockers.
Full-width, large twin cabin with 3/4 berth to starboard and single berth to port, dresser and settee between. Excellent storage, book shelves and hanging lockers, with a full en-suite head with stall shower.
Raised salon design provides superb visibility through wraparound, tinted fixed Plexiglas. Large U-shaped dinette on starboard with leather upholstery and panoramic visibility. Full size chart table with instrumentation on port, leather seat on mechanized unit that swivels 360 degrees. Entertainment area is aft and has built-in cabinetry with dry bar. The interior joinery is state-of-the-art lightweight teak composite from Concordia custom craftsmen, lighter and stronger than typical plywood/veneer construction technique of production Swan-style interiors.
Down amidships on starboard, with large, U-shaped work area. This area is open to the main salon, providing an open, airy feeling, good ventilation and indirect lighting to eliminate shadows for the gourmet chef. A secure working environment in any sea condition.
Gimbaled Force 10 stainless steel 3-burner propane stove with oven
Seafrost refrigerator freezer with engine driven, 110-volt compressor, plus DC driven compressor (New 2008)
Stainless steel Seafarer (8 gal) water heater
Furuno MFD 8 radar/plotter
Robertson AP 300X autopilot (2012)
ICOM M700 SSB radio (2012)
10" Ritchie compass
Rudder position indicator
Stereo CD player
ICOM IC-M-80 VHF radio
Dytek sea water temp
Furuno radar with 36-mile range
Edson wheel steering
B&G Sailing Instruments H3000 series
B&G depth sounder
B&G speed and distance log
B&G wind speed indicator
B&G wind angle indicators, full and close-hauled
Shore power 110V, 220V AC electrical system
12V & 24V DC electrical system
Balmar PC 750 DC generator
Electrical bonding system
12V Professional Mariner battery charger
24V Professional Mariner battery charger
2500W inverter and 12V converter
Battery parallel switch
(3) Dockside electrical cables
Smart voltage regulator
High output 100-amp alternator
Bass custom electrical panel
High output 150-amp alternator on genset
Glued teak deck (replaced 2008)
(4) Safety harnesses
65 lb. Bruce anchor
65 lb. Danforth anchor
300' 3/8" chain
(4) Emergency life vests
Maxwell/Nilsson electric windlass
Coast Guard safety package
Sea Recovery 20 gal/hour watermaker
Man overboard pole
Fresh water washdown
Oak custom cockpit drink holder
Avon dinghy (13') w/ 9.8 hp Nissan outboard
Switlik life raft
Swim boarding ladder
MOM emergency pack
SAILS and RIGGING
3-Spreader custom Hall aluminum mast with internal spinnaker track and external storm trysail track
Hydraulic boom vang
SELDEN hydraulic roller furling headsail
NAVTEC hydraulic roller furling staysail
Hydraulic backstay adjuster
Hydraulic outhaul system
Hydraulic baby stay
All hydraulic lines replaced from 2008-2014
Stainless steel standing rod rigging
Forestay, backstay, genoa furler and foil replaced 2012
Harken cars, blocks and deck hardware
(1) #28 ST hydraulic utility winch
(1) #36 ST hydraulic main sheet
(2) #36 ST
(2) #36 3-speed ST hydraulic primaries
(2) #19 ST hydraulic
Sobstad fully battened mainsail
Quantum staysail, 2010
Additional new staysail in storage
Quantum Yankee, 2000
(2) Quantum tri-radial asymmetrical chutes, 1998
STAMPEDE was conceived as a modern performance cruiser that offered a custom, high quality finish on an easily driven hull form. She was built strong and light to cruise short-handed or to cross oceans, both of which she has done with great success. Over the years her owner has continually upgraded her when needed.
The owner’s personal effects are excluded from the sale.
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.