This is a one owner Hunter! The Hunter 31 is a proven blue water boat. Sailors from Maine to Florida, Texas, California, and the Great Lakes have been making the Hunter 31 their choice.
She's been engineered for those long cruises or your favorite races.
One look below decks and you'll see all the amenities you could ask for. She's been designed for ease of movement as well as maximum utilization of the 6'3" headroom and the 10'11" beam. The 31 comes with a complete and fully equipped galley, fore-and aft dinette, a completely private head with shower and vanity, a chart table with light, berths for seven, loads of stowage space and all is color coordinated.
Above decks, you'll find a well designed and engineered boat. Molded-in non-skid on the deck allows your crew to move with ease and safety. The cockpit is large and contains pedestal steering with complete engine controls and a lighted compass. The cockpit seats contain lockers for convenient stowage of lines and other deck gear. You and your crew can spend many enjoyable hours at the helm of the Hunter 31.
Warren Luhrs and the Hunter Design Group go to great lengths to insure reliability, dependability, endurance and economics in the Hunter 31.
The Hunter 31 begins with a hull laid up by hand with pre-cut fiberglass to insure consistency. After the hull is cured and thoroughly inspected, we then bond a full length internal frame and stringer system of unidirectional fiberglass directly to the hull to increase its stiffness without adding undue weight. The chain plates are secured to the system and is then brought thru the deck in one clean penetration, creating more interior space and minimizing deck clutter. The load is then distributed to the hull thru the internal frame and stringer system.
The structural system allows the Hunter Design Group to obtain the maximum utilization of the interior space below decks.
The exterior hull-to-deck joint is engineered to minimize leaks and act as a spray rail. A custom pre-bent toe rail extrusion is thru-bolted providing additional strength and protection. The stanchions are mounted outboard which allows for easier and safer movement about the side decks.
The headliner on the Hunter 31 is turned down at the sheer, then bonded to the hull to form a sheerline beam that stiffens the boat and acts as a wire chase.
The 31 has the patented B&R rigging system with no babystay or running backstays - so you get better control and faster tacking. The swept back spreaders allow tighter sheeting angles of the headsails, and a smaller spar section reduces windage and interference with the leading edge of the mainsail.
The laminar flow section of the keel has been cast for more accurate, more efficient shape. And an aircraft type fairing provides a sleeker interface between the hull and the keel. Both the shoal and deep draft keels have sumps and recessed ears that distribute the load between the hull and internal frame.
As the finishing touch in creating a more exciting sailboat, the Hunter design Group has created the hull of the 31 for maximum speed under all conditions, with special emphasis on upwind performance.
Please come and take a look and sail off to the horizon on your own sailboat!
For more information or details, please contact Steve Dake, Director of Sailboat Sales, at (231) 759-8596 or by email at email@example.com.
Steve has been in the marine business for over 40 years. Please use his knowledge and experience to help you find the right boat for your needs.
Because we value your time, please call and make an appointment prior to visiting. Your scheduled appointment helps ensure the ability to board and see the boat you would like to preview. Please wear boat shoes only to board all boats. The only exceptions are non-marking treads. Thank you!
Wheel Cover is like new
Fenders - 2
Bottom paint is VC-17 annually
Sanded exterior teak to prep for oil or varnish 2017
Chart Table - Teak
Head - Pump
Opening Ports - 7
Screens - Ports and Hatches
Re-oiled interior teak 2017
Batteries - 2
Roller Furling by Pro furl- 2006
Compass has a small air pocket
Depthsounder - Datamarine
GPS - Lowrance, 2015
Knotmeter - Datamarine
VHF - Upgraded 2017
Cradle - Steel
Water tank pump in 2018
Water/fuel separator 2012
Main - Dacron, Original
Main Cover - Original
Jib - 155%, Dacron, 2006
Summer - Harbor Towne, Muskegon, MI
Winter - Torresen, Muskegon, MI
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
July 12, 2018
Torresen Marine, Inc. - The Sailboat Specialists
3003 Lake Shore Drive
Muskegon, MI 49441