- Vis komplette spesifikasjoner
Multiple Championship Winner
- Plymouth, Devon, UK
- Aktuell pris:
- £ 13 500 (NOK 161 199)
RS Elite Sail Number 33 - Fast Boat with multiple wins under its belt.
Ready to go with 2 suits of sails - 1 set used once and 1 club set
Delivery Available if required
Tacktick Wireless Speed/Depth Compass
Cockpit cover (1 seasons use)
Road trailer (with launch trolley)
Dry stored over winter and lightly used in Salcombe last year
21st Century Boat Sales Performance brokerage for Plymouth and the Westcountry We are open 6 days a week, Mon - Sat, Sundays by prior appointment
Please contact Kim Vasey for details and viewing information
Please contact Kim Vasey at +44 (0)1752 484176
Gå til nettside
Tilleggsinformasjon, tilbehør og utstyr:
Designer: Phil Morrison
Kjøl: fin kjøl
LOA: 7.40 m
Bom: 1.73 m
Maksimum Kjøldybde: 1.10 m
Avvik: 974 kgs
Manufacturer Provided Description
Undiluted pleasure - the RS Elite is fast but puts delightful manners and tactical racing above sheer speed and adrenaline. A discerning sailor's displacement keelboat that will be equally at home fleet or match racing. Minimal maintenance, comfortable sailing, the ability to be raced by men and women of virtually all ages and remarkably low purchase and campaign costs make the Elite all about enjoyment.
- The hull is long and narrow for maximum waterline length and minimum form resistance.
- The helm remains finger-light at all times, even when heeled, unlike wide flat hull designs.
- The narrow hull and no hiking rule also mean that crew weight is unimportant.
- As soon as the boat heels the crew are sat virtually straight above the centre of gravity, contributing very little to righting moment.
- The Elite has been designed around a three person crew, but class rules allow two to four people to race aboard and the spacious cockpit is very comfortable.
- Hull, deck and cockpit liner mouldings are solid GRP laminate for impact resistance and durability. There is a sub-floor moulding to distribute the rig and keel loads.
- GRP moulded keel and rudder skins mean all foil shapes are identical and there is an encapsulated lead keel bulb with stainless steel support structure. The vertical stainless steel strut slots into a hull recess and is through bolted from within the cockpit.
- There is a single lift point on the cockpit floor.
- An easily driven hull means the boat does not require a big rig. This in turn helps to make the shallow draft possible without the boat becoming tender.
- The ultra light-weight carbon fibre mast has a pivoting heel plug and can be raised by hand. Rigging is quick so you can arrive at a regatta with the boat on its trailer and be ready to sail in around 30 minutes.
- Single swept back spreaders and no backstay give a simple, highly responsive rig that can be easily tuned. Rig tension is applied to the forestay via a cascade purchase concealed under the foredeck and adjusted from within the cockpit.
- The boom and spinnaker poles are aluminium for durability.
Sail handling systems
- The jib hanks onto the forestay and has a tack downhaul lead back to the cockpit. It is self-tacking to make manoeuvres perfectly simple. A 4:1 purchase on the sheet keeps the loads in check.
- The combination mainsheet runs on a track across the aft deck and leads forward along the boom to a jammer in the centre of the boat. Either the helmsman or middle man can trim. Kicker and cunningham are also lead to the middle of the cockpit and split to both sides. The outhaul is controlled from the forward end of the boom.
- The spinnaker is launched and retrieved from a dinghy style chute forward of the forestay, so hoists and drops take seconds. The pole system means you don't need a gorilla and there is no need to leave the cockpit. Spinnaker sheets lead to the middle of the cockpit within reach of all the crew.
- Tack Tick instruments
- Outboard motor bracket
- Cockpit cover
Construction and General
Designer Phil Morrison
Length 7.4m (24'4")
Beam 1.72m (5'8")
Draft 1.1m (3'7")
Sail area – mainsail and jib – radial cut mylar 23.5m² (250ft²)
Sail area – spinnaker radial cut 25m² (266ft²)
Mast – carbon fibre
Boom – aluminium alloy With pole stowage
Spinnaker pole – aluminium alloy
Double ended Twin spinnaker poles Single ended
Keel with GRP skins and encapsulated lead bulb 62% ballast ratio
Rudder – balanced spade
Alloy tiller + extension
Self-tacking jib track and traveller
Control line led to cockpit
Mainsheet track and traveller – full width Controls led to cockpit
Vang - Downhauls - Travellers - Pole controls Led to cockpit
Single lift point On cockpit sole
Bow & stern mooring eyes
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
*This price is based on today's currency conversion rate.