Delivered to a client up in the Sacramento Delta to rip around on as a go fast daysailer. The boat has never been raced, it has lived the summers in fresh water with bottom paint.
If you are looking for the perfect go fast short handed daysailer this J/70 would be perfect.
The boat is currently on the trailer in covered storage.
The J/70 speedster is the next-generation ramp-launchable keelboat. It introduces a new dimension of fun, fast sailing in a stable, easy to own boat. The high aspect, carbon rig provides superior performance and stability. Off-the-wind, J/70 simply flies- the masthead spinnaker and plane away in moderate breezes.
- Large comfortable cockpit with open transom. - Deck-stepped carbon mast with single spreaders. - Three sail inventory with masthead A-Sail. - Vertical lifting bulb keel. - Small cabin for storage and personal privacy. - Easy to trailer and ramp launch
contact Norman Davant
Please contact Master Sailcal at 510-523-8500
Tilleggsinformasjon, tilbehør og utstyr:
Kjøl: pære kjøl
LOA: 22 ft 9 in
Bom: 7 ft 4 in
LWL: 20 ft 6 in
Maksimum Kjøldybde: 4 ft 9 in
Avvik: 1750 lbs
Hull and Deck Construction
Hull laminated with biaxial and unidirectional E-glass fabrics and balsa core for rugged durability.
Deck molded with E-glass fabrics and Corecell foam core. High density core material and additional reinforcements in way of highly loaded hardware.
All laminates are engineered and built to required ISO structural standards.
Molded internal bulkheads with gelcoat finish, bonded to the hull and/or deck.
Molded lift-keel structure jigged and integrally molded during primary hull layup.
High strength, inward turning hull to deck joint bonded with structural adhesive.
Molded non-skid on horizontal deck surfaces.
Keel & Rudder
4.75’ draft lifting keel with lead ballast featuring an internal leading-edge kelp cutting mechanism operable from the cockpit while underway, SS lock down plate and a single point lifting ring w/2:1 aluminum keel crane lift system.
Investment cast diamond boat lift padeyes installed adjacent to keel P&S.
High aspect transom mounted molded rudder.
Composite tiller with adjustable tiller extension.
Spars & Rigging
Carbon mast with single swept carbon spreaders, carbon masthead crane and mainsail luff track. Easy to raise and lower with deck step design and tabernacle system. Mast finished in satin black with contrasting white bands.
Carbon boom with internal 4:1 outhaul, mainsheet attachment point, outhaul and single reef sheaves as well as provision for reef cleat and block at inboard end. Finished in satin black with contrasting white bands.
Carbon bow sprit with tack ferrule fitting, painted black finish and seal system mounted at sprit housing.
1 x 19 wire standing rigging with adjustable Ronstan turnbuckles for shrouds.
Double ended boom vang system.
Complete running rigging package.
SS custom fabricated chain plates for shrouds and backstay terminations.
Interior ventilation hatch mounted on cabin house forward of mast.
Two Primary winches with cam cleats and winch handle.
Two jib T tracks with cars to accommodate 2:1 jib sheet terminations.
5:1 mainsheet purchase leading to ratchet block and centerline swivel base.
Adjustable mainsheet traveler with 2:1 control line and cam cleats P & S.
Double ended backstay adjuster purchase system leading forward to P & S cam cleats.
Internal bowsprit launching system exiting aft face of the cabin house to cam cleat.
Underdeck headsail furling system with hoistable swivel and control line exiting aft face of cabin house to cam cleat.
Tack line cam cleat mounted to starboard on cabin.
Spinnaker sheet blocks outboard of primary winches and aft.
Halyard lead blocks mounted at mast base.
Four low height SS stanchions and two reinforced SS stern rails at transom corners.
Cockpit Safety Lines surrounding the cockpit with comfort pads and termination points on deck edge forward of shrouds.
Transom Safety Gate.
Foredeck U-bolt for mooring/dockline attachment.
Air dry gelcoat finish on hull & deck surfaces
Bench style molded seats P & S.
Bin storage aft of seats.
Molded liner platform with inspection port forward.
Molded cockpit support bulkhead with inspection port.
Anodized aluminum compression post to transfer mast step loads to internal hull structure.
The trailing edge of both foils have been straightened out
Quantum sail inventory
Harken spinnaker winches & deck hardware
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.