This boat has a highly motivated Seller! It is time to ACT - if interested! Someone is going to walk off with this great boat, at a great price!
Extreme H2O is the lightest, fastest Gunboat 66 available today.
The boat features all the state of the art performance enhancements:
- a fully integrated hybrid system, with retractable propeller drives
- push button State-of-the-art Morrelli & Melvin asymmetric "C” foils and “T” rudders
- Southern Spars rotating wing spar, aft beam traveler, tiller steering for racing, mainsheet controls at all steering stations and a powerful sail plan, with a full inventory of high performance sails - makes “H2O” an extremely fast catamaran, setting the bar for performance racing/cruising catamarans - worldwide.
Speed and performance do not sacrifice the luxury features of this cruising catamaran - which can realize up to 30 knot sailing speeds.
The fully integrated hybrid system will allow you to depart the dock, enjoy a day of sailing and return to the dock without ever having to listen to a diesel motor. Better yet, you can enjoy a tropical night at anchorage with 30,000 BTU of air-conditioning without the noise of a generator.
“Extreme H2O” is arguably one of the highest performance cruising catamaran,worldwide. A product of the Morrelli & Melvin Design & Engineering design office, “H2O” was optimized for performance throughout a wide range of wind conditions.
This powerful sail plan is managed with advanced sail handling systems in both the forward cockpit with 4 high speed hydraulically driven winches and at all steering stations with push button mainsail
Morrelli & Melvin's designed the “C” foils to provide up to 4,000 kg of vertical lift and the “T” rudder to reduce pitching when the wave angle is forward of the beam. The “T”” foils are removable while boat is in the water so the boat can be easily configured for optimum speed and comfort.
“Extreme H2O” began construction in South Africa by Gunboat. After the Gunboat closed its doors, the boat was moved to the US and completed by Westerly Marine - a custom boat builder, founded in 1970, and located in Santa Anna, California - specializing in Carbon Fiber Performance Vessels. Over 56,000 hours were required to complete the boat to certified standards.
Hulls: Carbon inner skin and outer skin / 25mm Corcell Sandwich
Cabin: Carbon inner and outer skin / Nomex honeycomb and Corcell sandwich
Cabin soles: Carbon / Nomex honeycomb sandwich
All secondary taping Carbon fiber / Epoxy and post cured
All laminates vacuum-bagged and post cured.
All of Extreme H2O power requirements such as refrigeration, instrumentation, lighting, winches are run easily run from the battery bank. The large inverters allow use of Aircon throughout the night without the use of generators. The boat has a battery operated powering range of 45 minutes without the use of generators.
Our firm (Morrelli & Melvin) was responsible for the design of all the early Gunboats (the GB48, GB62, GB66 and GB90 designs). These are the designs that established Gunboat’s reputation. We have also been closely involved with the continuing support and design improvements on these boats, for the last 10 years. As such, we know the boats very well. This is the case with "Extreme H2O", as well – having been involved in her design, her build and ongoing improvements. As such, we are very qualified to speak to her history, characteristics, and capabilities (as with any of the original Gunboat designs). A viewing of our company web site (www.morrellimelvin.com) will provide background on the performance pedigree that went into this design (world ocean record setters such as “Playstation”, America’s Cup defenders, such as “Stars & Stripes”), and those which have followed (subsequent Americas Cup challengers and defenders, Olympic class designs, etc). “Extreme H2O” comes from this world renown performance stable.
We would look forward to introducing you to this vessel. So please do not hesitate to contact us should you have any questions on the boat - her design, build, history, etc.
4 Double staterooms in hulls plus port forward crew quarter. 3 full baths, including carbon washing basin and carbon counter tops with stand up shower.
Port Forward Compartment: gear and sail sail storage
Stbd Forward Bow Compartment: large sail locker can fit the entire sail inventory on shelves.
Large dinette to port. Seats 10 - with storage underneath. Additional settee area with coffee table, drop down for day bed. Elevated navigation area, forward.
U shaped Galley (“Up”) – 5 burner Gaggenau stove, 3 refrigerator drawers and 1 freezer with icemaker, built in Miele Mtouch whole bean coffee system, Miele microwave and gas oven.
Flat screen TV on electrical lift disappears in the captains seat for a modern interior look.
The interior his modern with horizontal mahogany grain veneer and bamboo floors with
carbon and Corian countertops that are attractive, but practical, in long distance cruising
All Sails by North Sails:
Mainsail #1: 186m2, 3Di, 760i (37,200 dpi) with 2 offshore plys, 3 reefs, 6 full C-Tech carbon battens
Mainsail #2 (new Jan 16) 193m2, 3Di, 870 RAW, 2 offshore plys, 3 reefs, 5 full C-Tech carbon battens
Fractional screacher 106m2, 3Di, 760i, RAW, 19,600 dpi, on vectran luff cable
Mast Head screacher 150m2, 3Di, 760i RAW on vectran luff cable for bottom up furling
Solent: 72m2, 3Di 760i (39,800 dpi), Hank On,
Staysail: 41m2, 3Di 760i (35,000 dpi) roller furling on Vectran luff cable
MH0 reacher: 265m2, 3Di 760, 16,800 dpi, internal aramid luff cable for bottom up furling
R1 (New Jan 16): 3Di 87 Raw, 8820 Dpi, internal luff cable, top down furling
A3: 350m2, laminate, designed for external aramid luff cable for top down furling.
A4: 400m2, SK150, designed for external luff aramid luff cable, top down furling
A1: 358m2, NDPO 69/49 (polyester) designed for external aramid luff cable, top down furling
Fractional reacher: 186m2, 3Di, 16,800 dpi, internal aramid luff cable bottom up furling
Mast, Boom, Forward Beam and Longeron Prepreg Carbon by Southern Spars New Zealand,
Standing Rigging is EC6 by Composite Rigging,
Running backstay are aramid
All Hatches by Lewmar
All Portlights by Gebo
Longeron mounted Tack line winch: manual Harken 60.2
Forward cockpit Winches: all hydraulic
Primary Winches: Harken 990.3 ST
Secondary Winches: Harken 60.3 ST
Aft cockpit winches: used for Traveler and davit lines: Harken 60.3
1 x spade S200 Anchor
1 x 100ft Chain and 200ft ¾" Rode
1 x Lewmar V5 hydraulically driven Anchor Winch
1 x Danforth day anchor
Falcon 450 RIB with center console with 30HP Honda Engine
Safety / Liferafts:
2015 Ocean UltraLite 10 – PAX meeting all ISO requirements, packed in carbon hard pack & mounted on aft beam
JonBuoy bulkhead mounted recovery module with remote release at nav station and AIS location transmitter
10 qty KRU sport pro ISO manual inflation PFD/harnesses
10 qty personal AIS / DSC transmitter attached to KRU PFD
10 qty personal wide beam laser attached to KRU PFD
2 qty ACR EPIRB’s (one on boat and one in life raft grab bag)
All Category 1 required safety gear for multihulls per SER requirements
1 x Oceandata system Upside Up anti capsize with mainsheet release and all the parts for a forward cockpit release system. --Manual release buttons at each helm location and forward cockpit.
Electronics & Navigation
Forward cockpit - with 4qty 20/20 displays and 2 qty race displays all mounted on mast
Main cabin 1qty graphic display at Nav station and 1 qty graphic display in inside helm
Aft cockpit 4 qty race displays
1 x H5000 barometer module
1 x H5000 3D motion sensor
1 x BB&G 57” mast wand
1 x celesco String Pot for mast rotation sensor
1 x celesco string Pot for rudder position
1 x Simrad GS70 GPS
1 x Furuno GP33 GPS
1 x Furuno FA 150 AIS transponder and display
1 x Icom M400BB VHF with integrated AIS antenna
2 x Standard HX290 protable VHF
1 x B&G 4G Radar
1 x F250 Sat Com
2 x Naauticomp 15” sunlight Monitors
2 x Intense PC, window 7, RAM 8GB, Core 1.8GHz
2 x copies of Expedition software
1 x copy of Deckman software
2 x NavNet 3D Vector MapMedia US West Coast and Hawaii Charts
1 x Globe Surfer Quad band 3G
Cell phone receiver
1 x Wave Wifi booster for onboard wifi
1 x B&G H5000 Autopilot Computer & Controller located at interior helm
1 x Raymarine Type 3 linear drive hydraulic drive
1 x headstay load cell
2 x shroud load cell
1 x mainsheet load cell
C-Zone CAN-Bus control for non-critical electrical systems
Electrical, Power & Equipment
2 x 4 cylinder Volvo D2-40 20kW generators, output of 260 – 320 VDC
2 x AC High efficiency Fukuta motors with 25kW continuous and 40kW peak power, 3 phase, liquid cooled
2 x AC motor Traction Controller, liquid cooled, DC input, AC motor output
1 x LiFePo4 Battery Bank, 288 volt nominal, 28.8kWh, 11 enclosures, 8 cells per enclosure
1 x 4kW AC/DC shore power battery charger
2 x 250 - 320 VDC to 24 volt charger
1 x 100 – 400 VDC to 12 volt charger
1 x 250 – 320 VDC to 230 VAC inverter – liquid cooled to run all appliances (AirCon, microwave, refrigeration)
2 x 20 Gal Torrens Water heater (Heated by engine and AC)
110VA C Sockets in all Cabins and Heads
1 x 100 gallons Water 2 x 75 gallons Fuel
3 x 20 gallons Holding Tank
1 x 15 gallon sweet water tank
2 x 18 gallon hot water tanks AC or engine heated.
1 x Spectra Cape Horn water maker plumbed to a 15 gallon stand alone sweet water tank
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
201 Shipyard Way, Suite B
Newport Beach, CA 92663