Visit dufour-yachts.com to view the complete range
We would be pleased to give you a quote on any model including the red hot Dufour 460
Don't delay as the order book is getting filled for spring delivery
Hull: Hand-laminated in polyester/glassfibre; sides made from vacuum-bonded PVC foam core sandwich.
Gelcoat: NPG gelcoat with first mat impregnated with NPG resin forming an optimum barrier against osmosis.
Structure: Hull bottom counter-moulded, floors laminated into the hull.
Deck: Sandwich with injected PVC foam core
Ballast: Keel bolts bear on stainless back-plates
Rudder: Semi-elliptical shape, filled with closed-cell epoxy foam.
Rudder stock: Solid stainless steel.
Non-slip deck surface: Non-slip structured deck surface.
Starting forward you have a state room with ensuite head and separate shower stall. Moving aft you have the galley with a lateral configuration with double stainless steel sinks, pressurized hot and cold water, Corian countertops, 3 burner propane stove with oven, 12V refrigeration. Next you move into the main salon with straight settee to starboard equipped with aft facing navigation table, U-shaped settee to port with a centerline bench. Moving back again you have a head on either side with a stateroom on either side.
Shroud chainplates: Chainplates on hull sides
Safety chainplates: Safety harness chainplates in cockpit floor
Miscellaneous chainplates: 2 backstay chainplates
Midships mooring cleats: 2, aluminium • Mooring cleat: 4, aluminium.
Rubbing strips: 6 stainless, on hull sheerline
Fuel deck fillers: 2 • Water deck fillers: 3
Mainsheet tracks: On coachroof with adjusting car.
Genoa tracks: 2 genoa sheet tracks, plunger-adjustable low-lead cars
Through-deck fitting: Stainless swan-neck for electrical and electronic cables
Deck organizers: 2 deck 4-sheave organizers for halyard, sheet, and reef line returns.
Halyard winches: 2 halyard winches on coachroof.
Sheet winches: 2 genoa sheet winches at helm positions
Jamcleats: 2 rows of jamcleats port / starboard level with the companionway
Furler line jamcleats: 1 at aft end of sidedeck
Hatch covers: Sliding companionway hatch in Plexiglas®
Mast: Anodized aluminium with 2 levels of swept spreaders
Rigging: 9/10 fractional • Mast stepping: On deck
Lights: Anchor and steaming lights.
Topping lift: Boom topping lift cleats.
Boom: Anodized aluminium fitted with 2 continuous reefers.
Roller-furler: Genoa roller furler.
Standing rigging: Continuous in stainless single-strand cable, chrome-plated bronze rigging screws, comprising: forestay, backstay bridle with twin rigging screws, inter and lower shrouds.
Running rigging: “Running rigging in pre-stretched textile including: main and genoa halyards, boom topping lift, main and genoa sheets, 2 continuous reef lines, leech tensioner, 2 mainsheet car adjustments, furling line, downhaul tackle.
Mainsail: 2 wide reef strips, with battens and bag.
Distribution panel: 18 functions with circuit-breakers, voltmeter
Socket: 12 V on electrical distribution panel.
Isolator: 1 per set of batteries in the stbd companionway block
Pivoting console at nav table: holding the instruments and electrical distribution panel
Instrument console at nav table: Instrument console with cubby-hole below
Other: Electrical distribution panel, Plexiglas cover, outboard side
Ocean Yacht Sales Limited
115 Joseph Zatzman Drive
Dartmouth, NS B3B 1N3