1 of 54
|Tilbudt av||Pacific Yacht Management|
KURIOSO is a one and only Krogen 52 built to CE specifications. Therefore she can be easily cruised and sold in European and Mediterranean waters.
She is very lightly used and exquisitely maintained.
She is easily viewable, located at Fisherman's Terminal in Seattle!
KURIOSO is an OPEN OFFICE model, offering the master stateroom forward, guest stateroom to starboard, fitted with two twin bunks, expansive saloon, galley and pilothouse. The cockpit is teak and is fully covered and has a side weather door to close off the starboard walkway when so desired. Each stateroom has an en-suite head and separate stall shower.
There are seats with storage under on the forward side of the Portuguese bridge deck, gentile steps lead from the bridge deck up to the boat deck and flybridge. KURIOSO has the optional "Summer Kitchen with BBQ on the boat deck. This is an ideal location as it is protected from the wind in an anchoring situation. The flybridge is equipped with dual helm chairs and a dinette.
The interior is American cherry.
Saloon/Galley Settee: L-shaped starboard with storage below Table: Cherry, fold-out top with hi/low base Valances: Cherry Invisible sliding screen on Saloon door Bookcase/Storage Unit: Cherry with Corian® counter top Countertops: Corian® Galley Sink: Elkay®, stainless steel, double basin with Grohe faucet Galley Counter Tops: Corian® Below counter trash & recycling pull-out container Galley Appliances, Stainless Steel Finish: Refrigerator - Jen-Air® Microwave/Convection Oven- GE® Range/Oven – Bluestar® 24” propane
Pilothouse Watch Berth with Cherry High-Low Table: converts to double Overhead Hand Rails: (2) Cherry Overhead Electronics Cabinet Overhead Lights: i2 Systems red/white combination, LED Electronics Console: Cherry, raised wedge shaped with removable face Chart Drawers Chart Lights: (2) Imtra®, LED Holding Tank Indicator and Control Panel: SeaLand® TankManager™
Engine room access is through a watertight aluminum door from the open office area. Engine Room Sound Insulation: Pyrotek, Sorberflex with perforated aluminum Lighting: Imtra®, LED Workbench Stanchion Isolators: Soundown Sole boards with Awlgrip non-skid paint Fresh water hose with nozzle
All interior doors in the living accommodations have been O-Ring gasketed for elimination of noise transfer.
All interior drawers are on stainless slider mechanisms.
Hull and superstructure molds from high-grade female tooling. Hull construction includes use of USA-made, Cook® gel coat. Hand-Laid Knytex® fiberglass construction with Corecell® closed-cell PVC sandwich core used in topsides. Solid fiberglass below waterline with blister-resistant vinylester resin utilized on first two laminates below the waterline, with aramid fiber/FRP reinforcements. Superstructure includes Knytex® and mat (in combination with Corecell® cores) and surface mats for print-through reduction. Teak aft and side deck. Boat and fore decks have GripTex® non-skid finish. Bulwark has molded plank lines with gel coat finish. Polyurethane formulated marine sealants used at hull-to-deck, boat deck joints and exterior fittings. Marine-grade plywood bulkheads with molded fiberglass hat section stringers. Interior finished with handcrafted solid Cherry and veneers.
|Framdrift Type||Direkte drev|
|Framdrift Type||Direkte drev|
|Lengde på Dekk||16.05m|
|Enheter||1514.16 l (Rustfritt stål)|
|Enheter||5299.57 l (Aluminium)|
|Enheter||529.96 l (GRP)|