2023 Pacific Seacraft 4413m

Hand laminated with vinylester resins in hull for superior blister resistance (10 year osmosis warranty)

Hull reinforced with structural E-glass for added stiffness and impact resistance

Standard hull molded in Premium ISO-NPG gel coats, standard color is Oyster White.

Contrasting boot and sheer stripes; teak rubbing strake.

Hull and deck connection flanges bedded in polyurethane adhesive and fastened with stainless thru-bolts

Deck has molded in contrasting non-skid pattern; molded in bulwarks for added safety

Stainless steel chain plates and backing plates are double caulked and thru-bolted to hull sides

Rudder supported by high strength manganese bronze gudgeon. Steel reinforced skeg

Ballast – External one-piece lead casting with 1 inch stainless steel keel bolts.

Keel to hull joint bedded in epoxy

Interior – custom interior layout included, and built to owners specifications

2 Harken™ #60.2 two speed self-tailing primary winches,

3 Harken™ #40.2 two speed self-tailing halyard / utility winches,

1 Harken™ #46.2 two speed self-tailing mainsheet winch,

Harken™ deck organizers and foot blocks

Two stainless steel 12” bow mooring cleats with oval hawse pipes; two 10” spring cleats amidships

Two stainless steel 10” stern mooring cleats with chocks

One stainless steel anchor deck pipe on foredeck and one aft for stern anchor

All stainless steel hinges, hasps, deck fills, etc.

All cleats, winches, turning blocks, pulpits, and stanchions have backing plates double-caulked with polyurethane

Six teak handrails on cabin house. (stainless steel optional)

Four stainless steel hatches, one double opening

14 stainless steel port lights with removable screens

Four teak dorade style ventilators with stainless steel cowls

Fiberglass sea hood; teak trimmed companionway; teak sliding hatch and drop boards

Teak cap rail with “butterfly” insert at joints for strength

Stainless steel boarding gates, port and starboard with bare or coated lifelines

Stern chain locker to starboard with deck pipe

Stern mounted stainless steel swim ladder with teak treads

32” high double rail pulpits at bow and stern (1-1/4” OD) with running lights, wrap-around stern rail extends forward to gates enclosing cockpit

32” high stanchions with double vinyl coated or bare stainless steel lifelines per ORC specs

Stainless steel bow sprit with bobstay, two anchor rollers, locking pins, divided bow chain locker for two anchor rodes

All exterior teak sanded and hand varnished with eight coats of Epifanes High Gloss varnish

5 coats Epifanes™ “rubbed effect” varnish on all interior Mahogany.

6-5” headroom with teak and holly sole throughout cabin area

Half louvered cabin doors; louvered locker doors and solid drop doors

Cabin sole hatches banded in solid teak with positive locking flush latches

Almond laminate cabin house sides. White fiberglass molded planking-V-berth and quarter berth area

White matte finish below counter height, Mahogany cabinetry above

High resiliency foam cushions with choice of standard and optional fabrics

V-grooved hard headliner with removable panels and Mahogany battens

Underside of deck is insulated for acoustic dampening and to reduce condensation

All louvered and drop doors solid Mahogany

6’8” long and 52” offset double with drawers and shelves port and starboard

Two cedar lined hanging lockers with louvered doors; dressing seat; vanity with mirror

Drawers, bookshelf, cabinets and storage bins; fiberglass planking

Enclosed forward head with stainless steel sink in Corian counter with chrome faucet / pull-out shower

Teak sauna style seat; Mahogany cabinet for toiletries; drawers and storage locker; teak floor grate

Generous “J” shaped Corian counter; centerline polished under mount stainless steel double sink with pressure freshwater chrome faucet and back-up freshwater foot pump

Corian™ countertop with custom fitted cutting board (some custom colors additional)

Gimbaled Force 10 stainless steel 4-burner propane stove with thermostatic oven and broiler

Stainless steel safety bar/towel rack

13.0 cubic foot icebox and freezer compartment with poured foam insulation and hinged lids; electric evacuation pump

SeaFrost 12V BD cold plate refrigeration system with freezer

Large storage lockers, drawers and bins above and below counter top for provisions, dishes and cutlery

Built in trash bin

Corian™ countertop with custom fitted cutting board, (some custom colors additional)

7’ dinette to port with hi-low Mahogany table, converts to 50” wide double berth, 6’4” settee to starboard; storage bins under all seating areas

Mahogany storage cabinets and bookshelves over settees both port and starboard, two Mahogany ceiling grab rails

Mahogany handrails are located overhead and on key bulkheads throughout the cabin

Mahogany navigators chart table with lift top and chart storage, bookshelves and lockers; padded swivel chair

Large double berth; dressing seat; cedar lined hanging locker, shelves and storage compartments

Head compartment with Corian™ counter, stainless steel vanity sink, mirror and cabinets for toiletries

Separate shower stall with teak sauna seat and teak shower grate

Hot/Cold pressure freshwater system; 6 gal hot water tank; 110v electric and engine heat exchanger

Easy access freshwater manifold

Three water tanks with inspection ports, approx. 105 gallons total

Bronze thru-hull fittings with U.L. approved bronze seacocks below the waterline and bronze ball valves above the waterline; all thru-hull fitting double hose clamped

Marine head with “Y” valve, 20 gal. holding tank; electric overboard pump-out; deck shore side pump-out

25 gpm Whale manual bilge pump in cockpit operable by helmsman

Electric main bilge pump w/ float switch, electric shower sump pump

Yanmar™ 4JH57, 4 cylinder, 3000 rpm, 57 hp diesel with freshwater cooling and 125 amp alternator.

Three blade solid bronze propeller; PSS shaft seal

Removable 70 gallon fuel tank with gauge and cleaning port

Racor™ fuel filter with water separator; bronze seawater strainer; water lift muffler system

Insulated engine compartment for quieter running; work light in engine compartment

110 Volt AC shore power system with GFCI breakers

AC/DC master control panel with AC ammeter, AC voltmeter, polarity test circuit, 8 AC circuit breakers, DC ammeter, battery condition monitor and 20 DC circuit breakers, panel is hinged for access

Tinned copper DC wiring throughout, 4 gauge lightening ground to keel

One Lifeline™ AGM group 31 deep cycle marine engine starting battery (105 Amp-hours)

Two Lifeline™ AGM 4D deep cycle marine house bank batteries (210 Amp-hours each)

Blue Sea™ battery / parallel switch

Magnum AC inverter w/ ME-RC remote panel: 2000 continuous watts w/ 100 amp battery charger

LED interior lighting package: nine dome lights, seven reading lights

One adjustable LED chart light at navigation station

RG-213U coaxial antennae cable led from masthead to navigation station

7” long bench seats with contoured seat backs and seat drains

Contoured helmsman’s seat; two safety harness pad eyes

Two very large cockpit seat lockers for ample storage

Two coaming boxes with teak fiddles

Vented propane storage in stern lazarette locker, space for two tanks, one 5 gal/20 lb. tank included

Ritchie™ Pacific Seacraft polished stainless steel logo compass (stainless hood available)

Edson CD-I® rack and pinion pedestal wheel steering with brake and stainless steel pedestal guard

Single level engine throttle/shift controls; emergency tiller

Deep cockpit gutters with two 1-1/2” drains in cockpit sole to seacocks for fast self-bailing

Custom Aluminum spar with double airfoil spreaders

Harken MkIV Unit 2 Genoa furling system

Harken™ blocks for running rigging

Rigid boom vang

1x19 wire standing rigging, stainless steel turnbuckles

Internal Main and Genoa halyards, boom topping lift lead to cockpit; outhaul

Two-1st and two- 2nd reef lines lead to cockpit

Combination bow / foredeck light on mast, anchor light

9oz. full batten Mainsail.

8oz. 130% or 120% high clew roller furling Genoa